Plumbing, Heating & Ventilation
3/4", White, PVC Schedule 40, Solvent Ball Valve, NSF Approved, Rated For 150 PSI @ 73 Degrees Fahrenheit, EPDM Seats, EPDM O-Rings, Fits Both Schedule 40 & 80 Pipe, Solvent Ends Comply With ASTM D2466.
1", White, PVC Schedule 40, Solvent Ball Valve, NSF Approved, Rated For 150 PSI @ 73 Degrees Fahrenheit, EPDM Seats, EPDM O-Rings, Fits Both Schedule 40 & 80 Pipe, Solvent Ends Comply With ASTM D2466.
Master Plumber, 59", Chrome With Black Trim, Vinyl Shower Hose, Clamshell.
1-1/4", White, PVC Schedule 40, Solvent Ball Valve, NSF Approved, Rated For 150 PSI @ 73 Degrees Fahrenheit, EPDM Seats, EPDM O-Rings, Fits Both Schedule 40 & 80 Pipe, Solvent Ends Comply With ASTM D2466.
1-1/2", White, PVC Schedule 40, Solvent Ball Valve, NSF Approved, Rated For 150 PSI @ 73 Degrees Fahrenheit, EPDM Seats, EPDM O-Rings, Fits Both Schedule 40 & 80 Pipe, Solvent Ends Comply With ASTM D2466.
2", White, PVC Schedule 40, Solvent Ball Valve, NSF Approved, Rated For 150 PSI @ 73 Degrees Fahrenheit, EPDM Seats, EPDM O-Rings, Fits Both Schedule 40 & 80 Pipe, Solvent Ends Comply With ASTM D2466.
Master Plumber, 1" ID x 1-3/8" OD x 50', Clear, PVC Tubing, Reinforced With Spiral Polyester, For Use In Pressure Applications, Manufactured With Non-Toxic FDA Compounds, Use For Flexible Lines For Air, Water, Liquids, Beverages, & Gases As Well As Drain Lines For Air Conditioners & Dehumidifiers Where Higher Pressure Or Tubing Wall Stability Is Required, Excellent Resistance To Mild Acids & Chemicals, See Through Design Allows For Visual Flow, Not For Use With Ice Makers Or Petroleum Based Products, For Use With Hose Barbs & Clamps, Temperature Range 25 To 150 Degrees Fahrenheit, Working Pressure 125 PSI At 70 Degrees Fahrenheit, Tubing Is Marked Every Foot For Easy Measuring & Cutting, Dispenser Box.
1-1/4" White 90 Degree Street Elbow, Spigot x Slip, Used To Make A Right Angle Turn From Another Fitting, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
3" x 24", 3VP-24, Pellet Stove Pipe, Model VP, Type L Vent, Tested & Listed To UL-641 Standard As Well As The UL-103 Standard.
3" x 36", 3VP-36, Pellet Stove Pipe, Model VP, Type L Vent, Tested & Listed To UL-641 Standard As Well As The UL-103 Standard.
3" x 12", 3VP-12, Pellet Stove Pipe, Model VP, Type L Vent, Tested & Listed To UL-641 Standard As Well As The UL-103 Standard.
3" x 12", 3VP-WZAJ12, Adjustable Pellet Stove Pipe, Model VP, Type L Vent, Gives Installer The Ability To Add From 2-1/2" Length To A Maximum Of 10-1/2" When Slid Over Another Piece Of Type L Pellet Pipe.
3VP-90 Degree EL, 3", 90 Degree Pellet Elbow, Model VP Type L Pellet Vent, Used To Orient Pipe Between Vertical & Horizontal Orientation, Factory Sealed At Couplers To Prevent Leakage, Fixed Elbow, Improved Performance & Nicer Seams.
3VP-EL45, 3", 45 Degree Pellet Elbow, Type L Pellet Vent, Used To Offset Pipe Around Construction Obstacles, Factory Sealed At Couplers To Prevent Leakage, Fixed Elbow, Improved Performance, Nicer Seams.
1"x 3/4" White 90 Degree Reducing Ell, Slip x Female Thread, Used For Making A 90 Degree Turn In A Run While Also Reducing Size Of Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.